CASE MARINE – Waterproof iPhone with 0.25mm
“This is the Case Marine. Until now,
waterproof cases for smartphones haven’t looked very good, as they’ve all been
bulky. But we’ve developed a stylish, attractive case. It’s made of 0.25mm
polyurethane with a special finish. The screen part is made of acrylic. It can
be used for an iPhone or a Galaxy S2. With a bit of practice, this case can be
put on in about 5 seconds. When it’s attached, there’s a bit of slack at the
back. Even if the phone is placed in water, the case makes it waterproof to
everyday standards. The seal on the back has been certified by Oki Engineering;
it has a JIS rating of IPX8, which is the highest level in Japan. So it keeps
your smartphone waterproof down to a depth of 10m.”
Besides protecting your device from
raindrops, even if you accidentally drop your phone from 32ft (10m) height,
then this new cutting-edge Waterproof iPhone Case will make sure that your
device remains intact. The best feature about Marine iPhone Case is its
sleekness, which leaves a scope for using another case on top of this thin
case.
Availability of Case Marine Waterproof
iPhone Case is only restricted to Japan, for now.
Link below is the latest japan trend shop for CASE MARINE:
After
the Japan launch the CASE MARINE, Hongkong started to promoted and
giving news about CASE MARINE for citizen (which is the chinese version
of the japan one):
First
generation, which is bulky, it names Innopocket, is one of the best
waterproof case for iphone 4/4s. Please do visit the link belowe for
more information:
http://www.innopocket.com/product.php?productid=16350&cat=478&page=1
Amphibian from InnoPocket is one of the best
waterproof cases for your
iPhone 4/4S, it guaranteed waterproof to the international standard
IP68. Most cases will protect
your iPhone 4/4S from dust, the Amphibian also protects from sand and
water. Amphibian's 2-in-1 design is the only waterproof case with inner
shell that can be used as an everyday polycarbonate hard case.
This
molded polycarobonate inner shell is rigid and crush proof making the
case durable and strong. The silicon jacket and its dump out corners
will further protect your iPhonev 4/4S from accidental drops. Amphibian
is
the
ideal solution for all outdoor users. From golfers to yachters, mountain
bikers to kayakers, it provides a level of protection and performance
previously unavailable in other cases.
The
Play-Thru design allows for full touch screen functions. Cutout at the
back the camera will let you to take videos underwater with your iPhone
4/4S. *
*
Please use external flash, if you want to take photo in the dark the internal flash will have backscatter problem with the case
* When operate the phone underwater, you need to fill the space between the screnn and silicon jacket with air.
Features
-
Patented waterproof, protective and slim form fitting design
-
Guaranteed waterproof to the international standard
IP68
-
Submersible to 9.9ft/3m
-
Polycarbonate inner See-Thru shell for everyday use
-
Silicon jacket for added drop protection
-
Make and receive calls like normal phone.
-
Touch screen works though waterproof case
-
Take videos underwater
-
Attachment points for a lanyard
-
Patent no.: 7,641,046 B2
-
Compatible with both original iPhone 4 and iPhone 4S
-
Dimension:122x63x29mm, Weight: 98g
The RainBallet waterproof case for iPhone 4 will protect your phone
against impact, sand and water. This means that you should be able to
take it to the beach without having to fear for it. It also features
what maker The Joy Factory is calling ‘Sharpvue’ lenses that let you
shoot pictures and video with either camera underwater. It launch around last year, 2011 April.
AQUA
TEK S features include:
- Waterproof and dirt resistant design protects your
iPhone 4/4S from outdoor elements
- Poly-Carbonate, ruggedized casing withstands drops,
falls and spills
- Lio Polymer Battery and solar charger keeps iPhone
powered so users can hike, ski, camp and play longer
- Secures and protects the iPhone 4/4S while leaving
access to the phones camera, volume buttons, speakers and Multi-touch
display
- Easily charge and sync the iPhone in the AQUA TEK S by
opening the thumb screw and attaching a micro USB to the connector
- For Kickstarter Pledges you will receive one or more of these with
serial number in these 4 colors. (NEW) Safety Yellow, Signal Orange,
Black Night, or Urban Camo.
For more information about AQUA TEK, please visit link:
http://www.kickstarter.com/projects/514542087/aqua-tek-s
Patiam’s iPhone 4S underwater case goes
down to 300meters
Patima’s Canon PowerShot S100 housing,
which is an incredibly sturdy piece of housing design. Now it’s time for the
Korean manufacturer’s latest and indeed more “exotic” product. Today’s high-end
Android and iOS smartphones have very capable cameras and work especially well
as a video camera. So why not take one underwater? You can now If you want to
as Patima’s latest will let you take your iPhone 4 and 4S diving with you. The
Patima iPhone housing is named i-Patima and will withstand pressures down to
300 meters.
This housing is a video, or if you wish
a stills, housing. What this means is that it has the controls only for the
stills and video functions and you will not be able to make calls or browse
Deepshots once your phone is inside the housing. The Patima casing only has five
buttons which are enough for the crucial camera functions.
This housing just looks amazing and
anyone I have seen pick it up in the office have been struck by its… well
awesomeness. It looks like an extremely heavy duty ingot of silver with
built in windows. It truly is weapon grade and I’m sure you can “shoo away”
overly enthusiast sharks with it if needed. The housing is closed with two big
metal clasps which make sure there is absolutely no way it to open once in
use. It weighs about 400 grams without the phone and you can also add a
nice aluminium handle to it for a small extra charge.
To use the housing you will need to
upgrade your iPhone 4/4S software to the latest version. It is best to
customise your “quick start tray” (pardon me if I don’t know all the right
i-thingy jargon… I’m an Android user) so that you have a camera shortcut
included in the tray also. The buttons you have for the phone controls are the
on/off/sleep button on the side of the housing which is needed for obvious
reasons. Note that the phone needs to be turned on to standby before putting it
in to the housing. The next button is for the home button. By pressing the home
button twice you will activate your camera functions and then the 3 remaining
seemingly conductive touch screen buttons work for the video/stills mode
changer, for the shutter release slash record and for the gallery/review
button. You will only be able to view the last picture you have taken as you
can’t move about in the gallery. Nice and simple.
UPDATE: Because of the latest iOS software
update the way to use the iPatima housing does not work exactly as described
here. As the camera now needs to be unlocked with a swipe the double press does
not work anymore. To use the housing you will need to disable the lock screen
and insert the phone into the housing while it is active.
Conclusion: The Patima iPhone/Android
housing is the ultimate video housing for your smartphone. It is aimed at the
technical diving market but I can see it could work in any situation where you
will need extremely tough protection for your phone when videoing. If you are
planning to dive deep the Patima housing is the only off the shelf housing that
will allow you to take any camera to the crushing depths of 300 meters.
Even the mighty Gates housings are depth rated only to about 140m and
these mini submarines can cost five figure numbers. The iPhone in the i-Patima
housing is hands down the cheapest and the smallest video capable set-up you
can take beyond the 60m mark. The Patima housing is also the only real diving
housing officially available for the iPhone 4 and 4S models currently.
Please do visit links below about this Patima product:
